C
Useful but not very resistant
I bought the tray to use it for a very small looper/sampler. The tray itself does it job, it has a clamp with rubber inside to be clamped on a mic stand, and the clamp seems of decent quality.
By disassembling the piece that inserts into the clamp, it's possible also to force the tray to a certain angle (but only on that side), but you will need a hex key to set the new angle.
The angle is set through a pin that goes in radially spaced holes in the plastic, sadly this system is not very sturdy, it broke right after the first live (two holes are now conjoined as the separation between them broke, so the tray wiggles).
By disassembling the piece that inserts into the clamp, it's possible also to force the tray to a certain angle (but only on that side), but you will need a hex key to set the new angle.
The angle is set through a pin that goes in radially spaced holes in the plastic, sadly this system is not very sturdy, it broke right after the first live (two holes are now conjoined as the separation between them broke, so the tray wiggles).
3
0
Jelentem!
AF
Great
Great. Don't know how I feel about the tray sliding off when you pick it up, just need to get used to it. So that I don't spill anything.
1
0
Jelentem!
ÁS
Utter piece of junk!
Just got one, the clamp and the table itself seems nice enough, but the tilting mechanism is total crap. I took it out of the package and was messing around with it, seeing how it works and titled it and it never really was stable again.
The nut that holds it together just slips out of the plastic if you try to make it tight. I ended up drilling a hole and put a 3mm screw and nut to keep it together. Seems much better now!
Tilt is a very unnecessary feature and it would be a decent product without it.
The nut that holds it together just slips out of the plastic if you try to make it tight. I ended up drilling a hole and put a 3mm screw and nut to keep it together. Seems much better now!
Tilt is a very unnecessary feature and it would be a decent product without it.
3
1
Jelentem!
S
Great for the price
Im using it to hold a small pedal, the tray tilts a bit from side to side when i press the buttons on the pedal. Its plastic but it still does the job, the size is great. Probably best for lighter things.
1
0
Jelentem!
B
Gravity MA TRAY 3
It's Ok, useful for light things. Thanks
0
0
Jelentem!
G
Professional product
It does a brilliant work. I use it for my in-ear monitor little mixer and for my iphone. Stable and affordable.
0
0
Jelentem!
d
Très utile pour y déposer lunettes, GSM, crayon..... bref indispensable !
0
0
Jelentem!
Y
A good gadget to add to a microphone stand.
It does its job perfectly, keeping a small tray very useful in home studios to hold a small preamp or similar.
0
0
Jelentem!
P
Very practical
The shelve is as big as a slightly small mousepad. I put some Bodhran Tippers on there. What I really like is that the shelve can easily be taken off and put on the handle, so the handle can stay fixed to your stand. Quality is good, keeping into account the price and the fact it's plastic.
0
0
Jelentem!
a
bien mais pas top
a fait ce qu'on lui demande pour ça c'est cool, mais la partie qui tient l'attache au plateau est pas dingue, ça n'a pas tenu un petit déménagement, ce qui veut dire que ça n'aurait pas tenu d'être dans un flight case.. donc pas pour du déplacement
0
0
Jelentem!