Harley Benton Ibanez bottom plate w/hook

Back plate sized incorrectly: does not fit the aperture of the Maxon OD9 (but specifies that it does). Screws are not the correct gauge and poor quality; far too tight.. two screw heads snapped off completely, leaving the screw shaft stuck and unable to be removed.. the back of the pedal is now incapable of being re-attached properly, and all four screw posts irreversibly damaged. Lastly, the HB plate does not provide the required battery compartment separation. Wish I had never bought this and just removed the rubber boot instead. Do not buy this product if you have a Maxon OD9.

Positive: The plate shape, size and holes match my tube screamer TS9-DX ,

Negative: the included screws are good for the top positions but too short for the middle (by the battery compartment) holes.

Work around: Suitable screws found. I took effort as the original screw pitch is not a common one. This ones fit reasonable well my Ibanez TS9 Dx pedal. Screws No 4 2.9x16 mm Self Drilling Pozi Pan Head screws DIN 7504 MZ

Conclusion: Not the customer experience I would expect when purchasing from Thomann and their own brand.

Overall this is a great replacement for the back of an Ibanez TS808, it fit on the back of the pedal perfectly.
The only issue I had with this, and this is pointed out by other users, the screws supplied in the bag are terrible. They do Not appear to be the same thread dimensions are the original screws on a TS808.
I still had the original screws so this wasn’t really and issues, but supplied screws are so miss matched I could see them snapping while trying to tighten them as another user had stated.
The backplate is great, but beware of the supplied screws!!!!!!!!

Great fit for TS9, however two of the screws were too short, no problem if you have the original screws

Ordered it for my TS9, since I don't like ruining the original parts, works like a charm

Luckily I was gentle with the screws otherwise they would've broken.