GF
cx12 in g
Great instrument however you should note the following!!!:-
The slide had been placed in with the return spring off centre inside the body. As such the slide was completely jammed. Luckily I have other CX's and I know how to dismantle properly. The spring was irretrievably stretched and bent but I fitted a spare.
Your packers should at least test the slide before packing and sending. Quality control needs your attention!!!
The slide had been placed in with the return spring off centre inside the body. As such the slide was completely jammed. Luckily I have other CX's and I know how to dismantle properly. The spring was irretrievably stretched and bent but I fitted a spare.
Your packers should at least test the slide before packing and sending. Quality control needs your attention!!!
1
0
Jelentem!
CC
The housing is weak and breaks easily.
My CX12 is wonderful except for the housing or casing that surrounds it. It breaks easily and has to be replaced which costs €42 with an added €20 shipping when bought from the
Hohner C shop. It’s totally unacceptable that this inferior casing is used when the harmonica costs €200 approx. Three of the casings have broken on me and I fixed them with epoxy glue but that only lasts a month or two. Then I need to spend another €60. I would like Thomann to demand that Hohner go back to the design table and design a casing that has superior quality plastic and where the holes in the casing into which the metal bar slots can withhold the pressure from the bar.
Hohner C shop. It’s totally unacceptable that this inferior casing is used when the harmonica costs €200 approx. Three of the casings have broken on me and I fixed them with epoxy glue but that only lasts a month or two. Then I need to spend another €60. I would like Thomann to demand that Hohner go back to the design table and design a casing that has superior quality plastic and where the holes in the casing into which the metal bar slots can withhold the pressure from the bar.
0
0
Jelentem!