Doepfer A-119
External Input / Envelope Follower
Module A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The preamplifier has two inputs: the unbalanced input with a gain factor of 0 ... 20 is mainly used for line-level signals, while the balanced input has a gain factor of 0 ... 500 for the integration of low-level signals (microphone , Electric guitar).
The envelope follower generates an envelope at its output, corresponding to the signal profile of the external audio signal. The comparator generates a gate signal corresponding to the level of an adjustable trigger threshold. Three LEDs are used to control the amplification (overdrive), the envelope and the gate signal.
- Width: 8HP / 40.3 mm
- Depth: 45 mm (measured from the rear of the front plate)
- Power requirements: 30 mA (12 V) / -20 mA (-12V)
Külső bemenet / burkológörbe-követő
Az A-119 modul külső audiojelek integrálására szolgál az A-100 rendszerbe, és a következő komponenseket tartalmazza: előerősítő, burkológörbe-követő és komparátor. Az előerősítőnek két bemenete van: a 0 ... 20 erősítési tényezőjű aszimmetrikus bemenet elsősorban vonalszintű jelekhez használatos, míg a 0 ... 500 erősítési tényezőjű szimmetrikus bemenet az alacsony szintű jelek (mikrofon, elektromos gitár) integrálásához használható.
A burkológörbe-követő a kimenetén egy burkológörbét generál, amely megfelel a külső audiojel jelprofiljának. A komparátor egy kapujelet generál, amely egy állítható trigger küszöbérték szintjének felel meg. Három LED vezérli az erősítést (túlhajtást), a burkológörbét és a kapujelet.
- Szélesség: 8HP / 40,3 mm
- Mélység: 45 mm (az előlap hátuljától mérve)
- Tápellátási igény: 30 mA (12 V) / -20 mA (-12 V)
-
katalógusunkba bekerült: Április 2004
-
Termékszám 169621
-
mennyiségi egység 1 darab
-
Width 8 TE / HP
Doepfer A-119 External Input / Envelope Follower Module A-119 is used to integrate external audio signals into the syste...
Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...
Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...
Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...
Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...
Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...
Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...
Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...
Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...
Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...
Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...
Doepfer A-156 Vintage Edition Dual Control Voltage Quantizer * Vintage edition with black front plate * Converts a conti...
A termék raktáron van és azonnal szállítható
Szállítással kapcsolatos tájékoztatóÜgyfeleink, akik ezt a termékünket megnyitották, az alábbiakat is megvásárolták
Kiegészítők és hozzáillő elemek
Alternatívák összevetése
-
Doepfer Interfészmodulok ugrás a listára
-
ugrás a(z) Interfészmodulok termékcsoportra
-
ugrás a(z) Moduláris szintetizátorok termékcsoportra
-
ugrás a(z) Szintetizátorok termékcsoportra
-
ugrás a(z) Billentyűsök termékcsoportra
-
Doepfer gyártói adatainak megjelenítése
-
Doepfer Billentyűsök ugrás a listára