RME Fireface 802 FS + SoundID
Bundle offer comprising
RME Fireface 802 FS
60-Channel USB 2.0 Audio Interface
- 24-bit / 192 kHz
- Built-in DSP mixer with effects section (EQ, dynamics and reverb)
- 4 Analogue microphone preamps with gain control
- Inputs remote controllable via software
- TotalMix Remote
- TotalMix FX mixing / routing
- DigiCheck software
- DC-coupled outputs - CV/Gate Voltage Control
- Stand-alone operation with setup recall
- ICC - Intelligent Clock Control
- SteadyClock FS
- +48V phantom power
- Class compliant
- Internal switching power supply, 100 - 240 V AC, 30 Watts
- Construction: 19" / 1U
- Dimensions (W x H x D): 438 x 44 x 242 mm
- Weight: 2.8 kg
Connections:
- 4 Mic/instrument / line inputs: XLR / jack 6.3 mm combo
- 8 Line inputs: 6.3 mm jack balanced
- 8 Line outputs: 6.3 mm jack balanced
- AES / EBU input and output: XLR
- Word clock input and output: BNC
- 2 ADAT / S/PDIF optical inputs and outputs
- 2 Stereo headphone outputs: 6.3 mm jack
- MIDI input and output
- USB
- Remote connection for optional ARC USB (not included)
Sonarworks SoundID Ref Spk & HP w Mic BDL
Sonarworks SoundID Reference for Speakers & Headphones with Measurement Microphone (Box)
- Bundle of measurement microphone and software for speaker and headphone calibration
- Frequency response correction for studio monitors and headphones for the most linear playback possible
- Enables better assessment of recordings and mixes
- Room analysis and automatic room size calculation via numerous measuring points
- Audio Calibration Engine for the most accurate adjustment
- Any number of speaker profiles can be saved
- Comes with calibration curves for over 280 different headphone models
- Target curves can be customized in real time
- Translation Check simulates over 20 different devices and device types for the accurate implementation of a mixture
- Three selectable filter modes: Zero Latency
- Mixed and Linear Phase to optimize filter quality and latency for different listening situations
- Additional settings for mono
- Dry/Wet and Safe Headroom
- Only available in the app: MIDI mapping for various parameters and user presets for predefined output configurations
- Measuring microphone with pre-polarized electret condenser capsule
- Frequency range: 20 - 20000 Hz with measurement protocol
- Polar pattern: Omnidirectional
- Sensitivity: 14mV / Pa
- Inherent noise: 24 dB
- Signal-to-noise ratio: 70 dB
- Dynamic range: 106dB
- Maximum sound pressure level: 132 dB SPL
- requires 48V phantom power
- Connection: XLR 3-pin
- Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software
- Calibration file for 0° on-axis measurements in TXT format
-
katalógusunkba bekerült: November 2026
-
Termékszám 658901
-
mennyiségi egység 1 darab
-
Recording / Playback Channels 30x30
-
Number of Mic Inputs 4
-
Number of Line Inputs 12
-
Instrument Inputs 4
-
Number of Line Outs 8
-
Headphone Outs 2
-
Phantom Power Yes
-
Number of S/PDIF Connectors 2
-
Number of ADAT Connectors 2
-
Numer of AES/EBU Connectors 1
-
Number of MADI Connectors 0
-
Ethernet 0
-
Other Connectors None
-
MIDI interface Yes
-
Word Clock 1xIn, 1xOut
-
Max. Sampling Rate in kHz 192 kHz
-
Max. Resolution Rate in Bits 24 bit
-
USB Bus-Powered No
-
Incl. power supply Yes
-
USB Version 2.0
-
Width 483 mm
-
Depth 242 mm
-
Height 44 mm
-
Connection Format USB port Type B
-
Included in delivery Power Cable, USB-A to USB-B Cable, TOSlink Cable
-
Zero latency monitoring Yes
-