Tovább az oldal tartalmához

Varytec Event Par IP65 4in1 14x8W WDMX

4.2/5 csillag, összesen 6 értékelés alapján

Noiseless Stage Spotlight

  • With 4-in-1 RGBW LEDs and W-DMX
  • Ideal for use on stages and in other settings where noise needs to be kept to a minimum
  • Built-in receiver module from Wireless Solution (G5) for wireless control
  • Robust housing made from diecast aluminium
  • Split-yoke bracket for standing and hanging installations
  • Includes an IR remote control
  • Suitable W-DMX transmitter available under Article Nr 366876 and Article Nr 464173 (both are not included)
  • Suitable 4-in-1 case available under Article Nr 489959 (not included)

Technical specifications:

  • Light source: 14 x 8W RGBW 4-in-1 LEDs
  • Beam angle: 25°
  • Control: DMX (4/7/9 channels), master/slave, automatic programs
  • Selectable static colours
  • DMX input and output: XLR 3-pin
  • Power input and output: Power Twist TR1
  • Power supply: AC 100 - 240 V at 50/60 Hz
  • Power consumption: 112 W
  • IP rating: IP65
  • Dimensions with bracket (W x H x D): 293 x 298 x 155 mm
  • Weight: 4.8 kg
  • katalógusunkba bekerült: Május 2019
  • Termékszám 452127
  • mennyiségi egység 1 darab
  • Construction Type Outdoor
  • Number of LEDs 14
  • power of the single LED 8 W
  • Colour Mixing RGBW
  • LED Type x-in-1
  • Floor housing Yes
  • Fanless Yes
  • remote control Included
  • wireless DMX Yes
  • Housing Colour Black
90 100 Ft
Minden ár tartalmazza az ÁFÁ-t
Mennyiségi kedvezmény
Darabár Megtakarítás Mennyiség
90 100 Ft 1
86 079 Ft 4,5% 3
84 847 Ft 5,8% 5
Azonnal szállítható
1

6 Ügyfelek értékelései

4.2 / 5

színkeverés

fényerő

kivitelezés

5 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Good product, by tricky to connect (WDMX)
As7640 27.11.2025
Good product, but the user manual is incomplete. If a dot is blinking in the bottom right corner of the display, it means that a pairing has already taken place (probably at the factory) and that the device is waiting for its already assigned transmitter. To establish a link with a new WDMX transmitter, this pairing must first be erased. To do this, go to the “Ulrl” menu and hold down the “enter” button for 5 seconds. Only then will the Varytec accept a new pairing (by simply pressing the function button on the G5).
színkeverés
fényerő
kivitelezés
1
0
Jelentem!

Jelentem!