Tovább az oldal tartalmához

Fun Generation CL 105 A Stand Adaptor

2.8/5 csillag, összesen 97 értékelés alapján ()

Stand Adapter

  • Adapter for microphone stand (3/8") to the flange on the bottom of the Fun Generation CL 105 A (art. 437402)
  • Also suitable for Mackie SRM 150 (Art.252346), Behringer B105D (Art.477976) and Behringer B205D (Art.248038)
  • katalógusunkba bekerült: Augusztus 2020
  • Termékszám 486820
  • mennyiségi egység 1 darab
  • Type Tripod Sleeve
1 111 Ft
Minden ár tartalmazza az ÁFÁ-t
Azonnal szállítható
1

97 Ügyfelek értékelései

2.8 / 5

kivitelezés

67 Vélemények

S
S.Gyula 19.06.2026
a belső fémgyűrű azonnal kiszakadt . gyenge ragasztás miatt saját barkácsolással megragasztottam, alacsony értéke miatt nem küldtem vissza , mindkét vásárolt darabnál ezt a módszert választottam javításként, bosszantó volt
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
G
Rubbish
Grayoid 05.11.2021
The product is designed wrong. In the bottom there is a metal thread that is glued into plastic. When you tighten the item onto your stand the thread is not deep enough and causes the metal insert to become loose. My monitor smashed on the floor and broke. This is a terrible item don't buy it.
kivitelezés
6
1
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
J
Poor Quality
JamesBy 05.08.2022
The metal push fit section of the adaptor is not secure - first time I mounted the monitor, the plastic section separated from the screw thread and the monitor fell off. I bought 2 of these - both the same. It's quite soft plastic so it will only get worse. Putting the two parts back together just weakens the connection and shreds the plastic inner grooves meaning each refit is loose than the previous one. This product is not fit for purpose. The Mackie version is a higher quality and solid as a rock. Unfortunately they're hard to get hold of. Behringer used to include this adaptor WITH the monitor but now you have to source from a third party seller. Not good.
kivitelezés
2
1
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
TR
Dreadful - but can be improved !
Tony Roberts 10.05.2023
I'm a fan of Thomann, but the design and construction of this piece is frankly ridiculous ! As others have pointed out, the 5/8 female threaded ring is just lightly pressed into the plastic part, so it pulls out easily - potentially causing your beloved personal monitor to crash to the floor. There's also nowhere near enough thread.

However, alternatives are hard to come by, so for a bit of effort it can be improved. I used a 5/8-F to 1/4-M adaptor and extended this with a piece of 6mm brass tubing, reamed out to 1/4-20 and screwed tightly to the adaptor (with thread-lock). I then pressed this piece into the plastic part, packing this first with epoxy so it won't pull out.

Ridiculous to have to do this, but I think it will hold !
kivitelezés
4
0
Jelentem!

Jelentem!